High-fructose corn syrup in the HMI library has 20 reported results for total mercury from 2 sources.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
-
Metals measured:
Total mercury, in 20 results from 1 source.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
-
Main drivers:
Form, basis and where the high-fructose corn syrup was sampled; reporting limits decide how many results are non-detects.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
-
Practical framing:
Ask for lot results with a quantification limit well below the limit that applies in the destination market.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
High-fructose corn syrup overview
High-fructose corn syrup in the HMI library has 20 reported results for total mercury from 2 sources.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
For a buyer the practical points are the form bought, the basis a result is reported on, where the high-fructose corn syrup came from and the laboratory’s reporting limit. Testing finds contamination but does not remove it.
What counts as high-fructose corn syrup
This page covers high-fructose corn syrup, as sold (20 results).1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
Results stay on the basis each source reports: as sold or fresh weight, dry weight, or unstated. Dry-weight, as-sold and unstated results are never pooled, and no moisture conversion is applied.
Heavy metal contamination profile of high-fructose corn syrup
The table holds every extracted high-fructose corn syrup result: one row for each statistic a source reports for a form, group and metal, 20 rows in all, grouped by metal and form; percentiles, ranges and maxima for the same samples as a mean or median are shown on that row.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source → Monitoring medians are HMI calculations from individual submissions; non-detects remain intervals between zero and the reporting limit and are never read as zero.
9 rows can be rated against an HMI reference for the same form and basis, 0 rows have a direct same-study comparison, and the rest stay unrated with the reason recorded.
Comparison methods and scope
Each row is one statistic a source reports for one form of high-fructose corn syrup, group and metal; percentiles, ranges and maxima reported for the same samples as a mean or median are shown on that row. Different forms and preparation states are kept apart, and dry-weight results never share a reference with as-sold or fresh-weight results. Ratings place a result against an HMI reference built from monitoring results and ordinary-setting medians for the same form and basis. Same-study contrasts compare a contaminated or treated site with its control, targeted with random sampling, a prepared form with the unprocessed one, or one group of a study with the median of its other groups. Held rows failed a check against their own source and are shown but not compared.
First displayed analyte: Total mercury: 20 findings from 1 source. Each row retains its statistic and measurement basis.
Filter findings
20 of 20 findings · 1 analytes
About this table
| Food form | Collection scope | Finding (µg/kg) | Comparison | Evidence |
|---|---|---|---|---|
20 findings · 1 study | ||||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 42%, sample 12005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 42%, sample 22005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 42%, sample 32005 | sample value. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 42%, sample 42005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 42%, sample 52005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 55%, sample 12005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 55%, sample 22005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 55%, sample 32005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 55%, sample 42005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer A, HFCS 55%, sample 52005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer B, HFCS 42%, sample 12005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer B, HFCS 42%, sample 22005 | not detected. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer B, HFCS 42%, sample 32005 | sample value. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer B, HFCS 42%, sample 42005 | sample value. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer B, HFCS 42%, sample 52005 | sample value. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer C, HFCS 55%, sample 12005 | sample value. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer C, HFCS 55%, sample 22005 | sample value. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer C, HFCS 55%, sample 32005 | sample value. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer C, HFCS 55%, sample 42005 | sample value. | ||
| High-fructose corn syrup, as soldDufault et al. 2009 | US HFCS manufacturer C, HFCS 55%, sample 52005 | sample value. | ||
Shared dataset methods and interpretation
Source summaries retain their original statistic, material, basis and censoring. Each source drawer identifies methods and overlapping samples. No matched reference or pooled distribution is inferred.
HMI high-fructose corn syrup tHg reference · High-fructose corn syrup, as sold
Reference and scope
HMI high-fructose corn syrup tHg reference · High-fructose corn syrup, as sold. High-fructose corn syrup, as sold; As sold, as eaten or fresh weight, µg/kg; no moisture conversion. Distribution of subgroup median concentration values.
| Reference (µg/kg) | Q1 | Median | Q3 |
|---|---|---|---|
| Primary HMI reference | ≤5 | ≤5 | 185 |
| Alternative weighting | ≤5 | ≤5 | 185 |
20 reference units; 1 sampling family. Counts describe evidence units, not independent studies or certainty.
| Contributing family | Reference units | Weight |
|---|---|---|
| Dufault et al. 2009 | 20 | 100% |
Methods
HMI pools subgroup medians for high-fructose corn syrup, as sold on a as sold, as eaten or fresh weight basis: monitoring results summarized as one median per reporting region, sampling type and collection year, total diet composites and printed sample values as single observations, and printed subgroup medians from ordinary farms or markets. Each sampling family has equal total weight. Non-detects stay as zero-to-limit intervals, so quartiles carry lower and upper bounds. Means, ranges and maxima never enter as observations. Other forms, other bases, targeted sampling and results from mining, industrial, wastewater-affected, experimental, fertiliser or manufacturer settings are kept out of this reference.
Inverse weighted empirical CDF; midpoint at exact cumulative-weight boundaries. At least four reference units and a definitely positive Q1-Q3 spread are required. This is a display eligibility rule, not statistical validation.
Limitations
Dufault et al. 2009 is the only compatible sampling family for high-fructose corn syrup, as sold on this basis in the completed high-fructose corn syrup ledger, so this single-family reference cannot represent other markets. Reporting regions and purchase markets are not growing areas. Non-detects with differing limits widen the bounds. A position is descriptive concentration, not a safety or compliance judgment.
Admitted source families
Reference version and interpretation
Frozen evidence selection: 2026-10-22. Method: hmi-pooled-reference-v2.
hmi-pooled-reference-v2:high-fructose-corn-syrup-3c23fa4e973e:12231ae59bad
The reference is computed by HMI from admitted evidence, not copied from a study baseline. It describes the evidence currently in this scope; it is not a worldwide or current-lot benchmark. Source, year and region filters do not change it. Different HMI scopes are not one common ranking.
The result is below a reporting limit, and the range from zero to that limit crosses more than one band.
No findings match these filters. Change the selection or reset to show all source findings.
How metals reach high-fructose corn syrup
Mercury enters HFCS through the chlor-alkali manufacturing pathway. Several chemicals are required to make HFCS, including caustic soda and hydrochloric acid, which are used throughout the corn wet-milling process to adjust pH.8Mercury exposure, nutritional deficiencies and metabolic disruptions may affect learning in childrenBehavioral and Brain Functions 2009, 5:44Read source → Some HFCS manufacturers have used caustic soda produced at mercury-cell chlor-alkali plants, which carry residual mercury as a byproduct of the electrolytic process; when that mercury-grade caustic soda contacts the product stream, mercury can carry through to the finished syrup.8Mercury exposure, nutritional deficiencies and metabolic disruptions may affect learning in childrenBehavioral and Brain Functions 2009, 5:44Read source → Manufacturers using the membrane chlor-alkali process, which does not involve mercury, would not introduce this residual. The pilot study data are consistent with this interpretation: nine of ten samples from Manufacturer A, whose product was largely below the detection limit, suggest membrane-process sourcing, while Manufacturers B and C showed consistently detectable mercury in their HFCS. Mercury from chlor-alkali plants: measured concentrations in food product sugar No study in the library measured pathways for lead, cadmium, arsenic or other metals into high-fructose corn syrup.
Which forms and regions measured lower
The HMI reference for total mercury in high-fructose corn syrup, as sold pools 20 subgroup units from 1 sampling family, with a median of below 5 µg/kg and a middle half spanning below 5 (lower quartile) and 185 µg/kg (upper quartile).1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
In one study, total mercury across 9 groups of high-fructose corn syrup ranged from 12 µg/kg (US HFCS manufacturer A, HFCS 42%, sample 3) to 570 µg/kg (US HFCS manufacturer C, HFCS 55%, sample 3); the lowest is the lowest observed in that study, not an established sourcing preference.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
Processing, cooking and preparation
No study in the library measured the same high-fructose corn syrup before and after washing, peeling, drying or cooking for metals, so no processing effect can be stated. Heat does not destroy metals; cooking or drying changes a concentration by moving water or metal, not by removing the element.
Mitigation for high-fructose corn syrup
Controls with evidence for high-fructose corn syrup act at the stages below. Grow corn away from cement plants and other industrial emitters (evidence from corn): maize from the three farms downwind of the plant averaged 230-380 µg/kg lead, against 20 µg/kg at a control farm 18 km upwind; a farm 2.7 km upwind averaged 10 µg/kg.2Trace elements concentrations in soil contaminate corn in the vicinity of a cement-manufacturing plant: potential health implicationsJournal of Exposure Science & Environmental EpidemiologyRead source → Blend maize and other grains with rice in infant foods (evidence from corn): infant porridges and cakes mixing rice with maize and other gluten-free grains had median inorganic arsenic of 10 and 8 µg/kg, against 66 and 60 µg/kg for pure rice products; maize’s own share was not measured.3Dilution of rice with other gluten free grains to lower inorganic arsenic in foods for young children in response to European Union regulations provides impetus to setting stricter standardsPLoS ONERead source → Irrigate corn with fresh or ground water, not wastewater (evidence from corn): maize irrigated with sewage or industrial wastewater carried 260-550 µg/kg lead and 38-112 µg/kg cadmium; maize irrigated with Nile or ground water in the same governorates carried 30 µg/kg lead and 10 µg/kg cadmium or less.4Risk assessment of human exposure to lead and cadmium in maize grains cultivated in soils irrigated either with low-quality water or freshwaterToxicology Reports 7:10-15Read source →
Keep corn fields away from coal-fired power plants (evidence from corn): maize mercury fell from about 21 µg/kg at 1 km to 4.7-6.7 µg/kg at 3 km and 1.06 µg/kg at 5 km; maize bought at a grocery store more than 55 km away held 0.72 µg/kg.5Mercury pollution in vegetables, grains and soils from areas surrounding coal-fired power plantsScientific ReportsRead source → Ask for origin and lot lead results on maize grain (evidence from corn): western Pacific submissions from 2001-2010 had 24 of 327 lead results above 200 µg/kg against 8 of 890 in Europe, and European exceedances fell to none of 400 in 2014-2020.6GEMS/Food Contaminants database heavy-metal exportsGEMS/Food Contamination Monitoring and Assessment ProgrammeRead source → Test each lot against the limit for its form (evidence from corn): the EU limits lead at 200 µg/kg and cadmium at 100 µg/kg for cereals, and lead at 100 µg/kg and cadmium at 20 µg/kg for sweet corn, on a wet-weight basis; nickel limits apply from July 2025 for sweet corn (400 µg/kg) and July 2026 for cereals (800 µg/kg).7Commission Regulation (EU) 2023/915 of 25 April 2023 on maximum levels for certain contaminants in food and repealing Regulation (EC) No 1881/2006Official Journal of the European UnionRead source →
Filter findings
9 control comparisons
About this table
| Control | Material | Effects | Evidence | |||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Grow corn away from cement plants and other industrial emitterscultivation · As reported | Corn | Pb · Increased Pb · Increased | 1Abatemi-Usman et al. 2023 HMI source record · Original source One dataset family. Linked analytes, repeated seasons and reports are not independent studies. Effects and comparators LeadIncreasedDownwind farms higher (observational)Grain lead, dry weightFarm 2.3 km downwind against control farmMaize grain, dry weightHigh · HMI calculates the relative change from the retained source means: (380 − 20) / 20 × 100 = 1800.0%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. LeadIncreasedDownwind farms higher (observational)Grain lead, dry weightFarm 0.7 km downwind against control farmMaize grain, dry weightHigh · HMI calculates the relative change from the retained source means: (230 − 20) / 20 × 100 = 1050.0%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. Downwind farms against the upwind control farm, same harvest and method; 12-24 cobs per farm. How magnitude is classified HMI editorial magnitude bands: Low is a change greater than 0% and below 25%; Moderate is 25% to below 50%; High is 50% or more, relative to that control’s own comparator. Direction is shown separately. These are descriptive display bands, not validated efficacy cutoffs, occurrence-baseline positions, statistical significance, evidence certainty, safety or net benefit. A range spanning bands retains both labels; a qualitative label has no implied percentage. Control in context Maize from the three farms downwind of the plant averaged 230-380 µg/kg lead, against 20 µg/kg at a control farm 18 km upwind; a farm 2.7 km upwind averaged 10 µg/kg.
Design, applicability and operating conditions Observational field survey. Farmland near a cement plant; wind direction mattered more than distance. One study family. As reported by the source Reduces metal reaching corn, or detects it before release. Source measurements and linked outcomes
Observational; one plant and harvest. Differences are read from the source means or medians shown in outcomes. Basis as stated in outcomes; no mass balance reported. Trade-offs and implementation Mycotoxins are outside this table. Not assessed. Not assessed. Not quantified. Not assessed. Applicability and verification Farmland near a cement plant; wind direction mattered more than distance. Lot testing. See source. Extraction limits and next actions
Provenance and assessment As disclosed by the source. Source facts and HMI calculations are distinguished above. These selected source findings do not constitute a systematic review; outcome-level appraisal remains incomplete. | |||||||||||||||||||||||||||||||||||||||||||||
| Irrigate corn with fresh or ground water, not wastewatercultivation · As reported | Corn | Pb · Increased Cd · Increased | 1El-Hassanin et al. 2020 HMI source record · Original source One dataset family. Linked analytes, repeated seasons and reports are not independent studies. Effects and comparators LeadIncreasedWastewater irrigation higher (observational)Grain leadKafr-Dokhmais against Al-Hawia (Kafr El-Sheikh)Maize grain, basis not statedHigh · HMI calculates the relative change from the retained source means: (550 − 30) / 30 × 100 = 1733.3%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. CadmiumIncreasedWastewater irrigation higher (observational)Grain cadmiumAl-Nasiria against Al-Hawia (Kafr El-Sheikh)Maize grain, basis not statedHigh · HMI calculates the relative change from the retained source means: (112 − 10) / 10 × 100 = 1020.0%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. Wastewater-irrigated sites against the fresh-water site in the same governorate; three field points per site. How magnitude is classified HMI editorial magnitude bands: Low is a change greater than 0% and below 25%; Moderate is 25% to below 50%; High is 50% or more, relative to that control’s own comparator. Direction is shown separately. These are descriptive display bands, not validated efficacy cutoffs, occurrence-baseline positions, statistical significance, evidence certainty, safety or net benefit. A range spanning bands retains both labels; a qualitative label has no implied percentage. Control in context Maize irrigated with sewage or industrial wastewater carried 260-550 µg/kg lead and 38-112 µg/kg cadmium; maize irrigated with Nile or ground water in the same governorates carried 30 µg/kg lead and 10 µg/kg cadmium or less.
Design, applicability and operating conditions Observational field survey. Where low-quality irrigation water is used. One study family. As reported by the source Reduces metal reaching corn, or detects it before release. Source measurements and linked outcomes
Observational; basis not stated; one season. Differences are read from the source means or medians shown in outcomes. Basis as stated in outcomes; no mass balance reported. Trade-offs and implementation Mycotoxins are outside this table. Not assessed. Not assessed. Not quantified. Not assessed. Applicability and verification Where low-quality irrigation water is used. Lot testing. See source. Extraction limits and next actions
Provenance and assessment As disclosed by the source. Source facts and HMI calculations are distinguished above. These selected source findings do not constitute a systematic review; outcome-level appraisal remains incomplete. | |||||||||||||||||||||||||||||||||||||||||||||
| Keep corn fields away from coal-fired power plantscultivation · As reported | Corn | tHg · Increased tHg · Decreased | 1Li et al. 2017 HMI source record · Original source One dataset family. Linked analytes, repeated seasons and reports are not independent studies. Effects and comparators Total mercuryIncreasedNear-plant maize higher (observational)Grain mercury, fresh weight1 km from plant B against grocery controlMaize grain, fresh weightHigh · HMI calculates the relative change from the retained source means: (21.18 − 0.72) / 0.72 × 100 = 2841.7%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. Total mercuryDecreasedLower with distance (observational)Grain mercury, fresh weight5 km against 1 km from plant BMaize grain, fresh weightHigh · HMI calculates the relative change from the retained source means: (1.06 − 21.18) / 21.18 × 100 = -95.0%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. Distance gradient from each plant against a retail control. How magnitude is classified HMI editorial magnitude bands: Low is a change greater than 0% and below 25%; Moderate is 25% to below 50%; High is 50% or more, relative to that control’s own comparator. Direction is shown separately. These are descriptive display bands, not validated efficacy cutoffs, occurrence-baseline positions, statistical significance, evidence certainty, safety or net benefit. A range spanning bands retains both labels; a qualitative label has no implied percentage. Control in context Maize mercury fell from about 21 µg/kg at 1 km to 4.7-6.7 µg/kg at 3 km and 1.06 µg/kg at 5 km; maize bought at a grocery store more than 55 km away held 0.72 µg/kg.
Design, applicability and operating conditions Observational field survey. Areas downwind of coal combustion. One study family. As reported by the source Reduces metal reaching corn, or detects it before release. Source measurements and linked outcomes
Observational; sample counts per site not stated. Differences are read from the source means or medians shown in outcomes. Basis as stated in outcomes; no mass balance reported. Trade-offs and implementation Mycotoxins are outside this table. Not assessed. Not assessed. Not quantified. Not assessed. Applicability and verification Areas downwind of coal combustion. Lot testing. See source. Extraction limits and next actions
Provenance and assessment As disclosed by the source. Source facts and HMI calculations are distinguished above. These selected source findings do not constitute a systematic review; outcome-level appraisal remains incomplete. | |||||||||||||||||||||||||||||||||||||||||||||
| Choose durum cultivars with the functional HMA3 allelecultivation · As reported | Wheat | Cd · Decreased | 1Maccaferri et al. 2019 HMI source record · Original source One dataset family. Linked analytes, repeated seasons and reports are not independent studies. Effects and comparators CadmiumDecreasedTwo- to threefold lower transport to grain with the functional alleleGrain cadmiumB1a versus B1b linesGrain as reportedNot quantified · No supported numerical treatment contrast is retained for this finding. A direction, market association, source-selection strategy or guidance statement alone does not establish a percentage change. Near-isogenic lines and a global durum collection, B1a versus B1b. How magnitude is classified HMI editorial magnitude bands: Low is a change greater than 0% and below 25%; Moderate is 25% to below 50%; High is 50% or more, relative to that control’s own comparator. Direction is shown separately. These are descriptive display bands, not validated efficacy cutoffs, occurrence-baseline positions, statistical significance, evidence certainty, safety or net benefit. A range spanning bands retains both labels; a qualitative label has no implied percentage. Control in context The non-functional TdHMA3-B1b allele gives two- to threefold more cadmium transport to shoots and grain than the functional B1a allele; a PCR marker distinguishes low- and high-cadmium lines.
Design, applicability and operating conditions Measured comparison. Durum breeding and cultivar choice; 68% of modern durum cultivars carry the high-cadmium allele. One study family. As reported by the source Reduces metal reaching or retained in the grain, or detects it before release. Source measurements and linked outcomes
No grain concentrations in the main text. No percentage calculated unless shown in outcomes. Not applicable unless stated. Trade-offs and implementation Not assessed unless stated. Not assessed unless stated. Not assessed. Not quantified. Not assessed. Applicability and verification Durum breeding and cultivar choice; 68% of modern durum cultivars carry the high-cadmium allele. Lot testing. See source. Extraction limits and next actions
Provenance and assessment As disclosed by the source. Source facts and HMI calculations are distinguished above. These selected source findings do not constitute a systematic review; outcome-level appraisal remains incomplete. | |||||||||||||||||||||||||||||||||||||||||||||
| Fungicide at booting on high-cadmium soilcultivation · As reported | Wheat | Cd · Decreased Cd · Decreased | 1Motta-Romero et al. 2021 HMI source record · Original source One dataset family. Linked analytes, repeated seasons and reports are not independent studies. Effects and comparators CadmiumDecreasedLower with fungicide (upper end of cultivar range)Grain cadmium, cultivar meansUntreated versus fungicideGrain as reportedModerate · HMI calculates the relative change from the retained source means: (140 − 190) / 190 × 100 = -26.3%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. CadmiumDecreasedLower with fungicide (lower end of cultivar range)Grain cadmium, cultivar meansUntreated versus fungicideGrain as reportedModerate · HMI calculates the relative change from the retained source means: (70 − 100) / 100 × 100 = -30.0%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. Untreated plots of the same cultivars, site and years. How magnitude is classified HMI editorial magnitude bands: Low is a change greater than 0% and below 25%; Moderate is 25% to below 50%; High is 50% or more, relative to that control’s own comparator. Direction is shown separately. These are descriptive display bands, not validated efficacy cutoffs, occurrence-baseline positions, statistical significance, evidence certainty, safety or net benefit. A range spanning bands retains both labels; a qualitative label has no implied percentage. Control in context A single metconazole application at booting lowered the range of cultivar grain cadmium means from 100-190 to 70-140 µg/kg.
Design, applicability and operating conditions Measured comparison. One site with naturally elevated soil cadmium; one fungicide chemistry. One study family. As reported by the source Reduces metal reaching or retained in the grain, or detects it before release. Source measurements and linked outcomes
Attributed to yield dilution; other chemistries untested. No percentage calculated unless shown in outcomes. Not applicable unless stated. Trade-offs and implementation Not assessed unless stated. Not assessed unless stated. Not assessed. Not quantified. Not assessed. Applicability and verification One site with naturally elevated soil cadmium; one fungicide chemistry. Lot testing. See source. Extraction limits and next actions
Provenance and assessment As disclosed by the source. Source facts and HMI calculations are distinguished above. These selected source findings do not constitute a systematic review; outcome-level appraisal remains incomplete. | |||||||||||||||||||||||||||||||||||||||||||||
| Blend maize and other grains with rice in infant foodsproduct formulation · As reported | Corn | iAs · Decreased iAs · Decreased | 1Carey et al. 2018 HMI source record · Original source One dataset family. Linked analytes, repeated seasons and reports are not independent studies. Effects and comparators Inorganic arsenicDecreasedMulti-grain porridge lower (observational)Median inorganic arsenicMulti-grain against pure-rice porridgeAs soldHigh · HMI calculates the relative change from the retained source means: (10 − 66) / 66 × 100 = -84.8%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. Inorganic arsenicDecreasedMulti-grain cakes lower (observational)Median inorganic arsenicMulti-grain against pure-rice cakesAs soldHigh · HMI calculates the relative change from the retained source means: (8 − 60) / 60 × 100 = -86.7%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. Multi-grain against pure-rice products, as sold. How magnitude is classified HMI editorial magnitude bands: Low is a change greater than 0% and below 25%; Moderate is 25% to below 50%; High is 50% or more, relative to that control’s own comparator. Direction is shown separately. These are descriptive display bands, not validated efficacy cutoffs, occurrence-baseline positions, statistical significance, evidence certainty, safety or net benefit. A range spanning bands retains both labels; a qualitative label has no implied percentage. Control in context Infant porridges and cakes mixing rice with maize and other gluten-free grains had median inorganic arsenic of 10 and 8 µg/kg, against 66 and 60 µg/kg for pure rice products; maize’s own share was not measured.
Design, applicability and operating conditions Observational field survey. Infant food formulation; maize contribution not isolated. One study family. As reported by the source Reduces metal reaching corn, or detects it before release. Source measurements and linked outcomes
Observational market comparison. Differences are read from the source means or medians shown in outcomes. Basis as stated in outcomes; no mass balance reported. Trade-offs and implementation Mycotoxins are outside this table. Not assessed. Not assessed. Not quantified. Not assessed. Applicability and verification Infant food formulation; maize contribution not isolated. Lot testing. See source. Extraction limits and next actions
Provenance and assessment As disclosed by the source. Source facts and HMI calculations are distinguished above. These selected source findings do not constitute a systematic review; outcome-level appraisal remains incomplete. | |||||||||||||||||||||||||||||||||||||||||||||
| Ask for origin and lot lead results on maize grainsourcing and procurement · As reported | Corn | Pb · Increased | 1WHO GEMS/Food HMI source record · Original source One dataset family. Linked analytes, repeated seasons and reports are not independent studies. Effects and comparators LeadIncreasedWestern Pacific medians higher (observational)Median grain lead (upper bounds)WPRO against EURO random samplingMaize grain, as soldHigh · HMI calculates the relative change from the retained source means: (50 − 20) / 20 × 100 = 150.0%. This is a descriptive contrast of means; no confidence interval or significance test is inferred. Reporting regions and periods within one monitoring dataset. How magnitude is classified HMI editorial magnitude bands: Low is a change greater than 0% and below 25%; Moderate is 25% to below 50%; High is 50% or more, relative to that control’s own comparator. Direction is shown separately. These are descriptive display bands, not validated efficacy cutoffs, occurrence-baseline positions, statistical significance, evidence certainty, safety or net benefit. A range spanning bands retains both labels; a qualitative label has no implied percentage. Control in context Western Pacific submissions from 2001-2010 had 24 of 327 lead results above 200 µg/kg against 8 of 890 in Europe, and European exceedances fell to none of 400 in 2014-2020.
Design, applicability and operating conditions Observational field survey. Buyers sourcing maize grain internationally. One study family. As reported by the source Reduces metal reaching corn, or detects it before release. Source measurements and linked outcomes
Observational; reporting regions are not growing areas. Differences are read from the source means or medians shown in outcomes. Basis as stated in outcomes; no mass balance reported. Trade-offs and implementation Mycotoxins are outside this table. Not assessed. Not assessed. Not quantified. Not assessed. Applicability and verification Buyers sourcing maize grain internationally. Lot testing. See source. Extraction limits and next actions
Provenance and assessment As disclosed by the source. Source facts and HMI calculations are distinguished above. These selected source findings do not constitute a systematic review; outcome-level appraisal remains incomplete. | |||||||||||||||||||||||||||||||||||||||||||||
| Test each lot against the limit for its formlot acceptance and release · As reported | Corn | Pb · Context Cd · Context | GuidanceCommission Regulation (EU) 2023/915 HMI source record · Original source Official guidance; not an independent experimental dataset. Reused across actions without adding studies. Effects and comparators LeadRegulatory limit; detection, not removalLead limitCereals 200 µg/kg; sweet corn 100 µg/kgWet weightContext · No supported numerical treatment contrast is retained for this finding. A direction, market association, source-selection strategy or guidance statement alone does not establish a percentage change. CadmiumRegulatory limit; detection, not removalCadmium limitCereals 100 µg/kg; sweet corn 20 µg/kgWet weightContext · No supported numerical treatment contrast is retained for this finding. A direction, market association, source-selection strategy or guidance statement alone does not establish a percentage change. Regulatory limits; no measured effect. How magnitude is classified HMI editorial magnitude bands: Low is a change greater than 0% and below 25%; Moderate is 25% to below 50%; High is 50% or more, relative to that control’s own comparator. Direction is shown separately. These are descriptive display bands, not validated efficacy cutoffs, occurrence-baseline positions, statistical significance, evidence certainty, safety or net benefit. A range spanning bands retains both labels; a qualitative label has no implied percentage. Control in context The EU limits lead at 200 µg/kg and cadmium at 100 µg/kg for cereals, and lead at 100 µg/kg and cadmium at 20 µg/kg for sweet corn, on a wet-weight basis; nickel limits apply from July 2025 for sweet corn (400 µg/kg) and July 2026 for cereals (800 µg/kg).
Design, applicability and operating conditions Regulatory or author guidance. Corn placed on the EU market. One study family. As reported by the source Reduces metal reaching corn, or detects it before release. Source measurements and linked outcomes
Testing detects contamination; it does not remove it. Differences are read from the source means or medians shown in outcomes. Basis as stated in outcomes; no mass balance reported. Trade-offs and implementation Mycotoxins are outside this table. Not assessed. Not assessed. Not quantified. Not assessed. Applicability and verification Corn placed on the EU market. Lot testing. See source. Extraction limits and next actions
Provenance and assessment As disclosed by the source. Source facts and HMI calculations are distinguished above. These selected source findings do not constitute a systematic review; outcome-level appraisal remains incomplete. | |||||||||||||||||||||||||||||||||||||||||||||
| Milling durum wheatgrain processing · As reported | Wheat | Ni · Context Cd · Context | GuidanceThielecke and Nugent 2018 HMI source record · Original source Official guidance; not an independent experimental dataset. Reused across actions without adding studies. Effects and comparators NickelReported reduction; no valuesMilled productGrain versus milled productGrain as reportedContext · No supported numerical treatment contrast is retained for this finding. A direction, market association, source-selection strategy or guidance statement alone does not establish a percentage change. CadmiumReported reduction; no valuesMilled productGrain versus milled productGrain as reportedContext · No supported numerical treatment contrast is retained for this finding. A direction, market association, source-selection strategy or guidance statement alone does not establish a percentage change. Durum grain versus milled products (secondary citation). How magnitude is classified HMI editorial magnitude bands: Low is a change greater than 0% and below 25%; Moderate is 25% to below 50%; High is 50% or more, relative to that control’s own comparator. Direction is shown separately. These are descriptive display bands, not validated efficacy cutoffs, occurrence-baseline positions, statistical significance, evidence certainty, safety or net benefit. A range spanning bands retains both labels; a qualitative label has no implied percentage. Control in context The review reports that milling durum wheat reduced nickel most, then arsenic, cadmium and lead, without measured percentages.
Design, applicability and operating conditions Author guidance or regulatory assessment. Durum milling. One study family. As reported by the source Reduces metal reaching or retained in the grain, or detects it before release. Source measurements and linked outcomes
Secondary citation without numbers. No percentage calculated unless shown in outcomes. Not applicable unless stated. Trade-offs and implementation Not assessed unless stated. Not assessed unless stated. Not assessed. Not quantified. Not assessed. Applicability and verification Durum milling. Lot testing. See source. Extraction limits and next actions
Provenance and assessment As disclosed by the source. Source facts and HMI calculations are distinguished above. These selected source findings do not constitute a systematic review; outcome-level appraisal remains incomplete. | |||||||||||||||||||||||||||||||||||||||||||||
No matching controls in this selected evidence. This is a coverage boundary, not proof that no control exists. Change or reset the filters.
Trade-offs and limits of controls
Metals do not move together, so a lot that passes a lead limit says little about cadmium, arsenic or nickel unless those are tested as well.
Testing high-fructose corn syrup for metals
Results depend on the method and its reporting limit. Reporting limits for total mercury were 5 µg/kg where sources stated them.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
A useful lot result names the form, the basis and a quantification limit well below the limit that applies.
Buying and verifying high-fructose corn syrup
No maximum level for metals in high-fructose corn syrup was verified from primary text for this page; buyers should confirm the limit that applies in the destination market.
Exposure from high-fructose corn syrup
One review estimated daily mercury intakes from HFCS at up to 28 micrograms per person, calculated from the FDA-collected samples reported in the pilot study and US per capita HFCS consumption data.8Mercury exposure, nutritional deficiencies and metabolic disruptions may affect learning in childrenBehavioral and Brain Functions 2009, 5:44Read source → This is a derived calculation, not a direct dietary intake measurement, and no independent intake study for HFCS mercury was identified in the literature. Concentrations describe the food; individual risk depends on intake, body weight, background exposure and metabolic factors not modeled here.
Evidence review and remaining gaps
Every source record that names high-fructose corn syrup was decided on its content: 1 occurrence extracted, 1 record in all. The occurrence table renders every extracted result; held values remain visible with their reason.
References identify the sources used in these answers. The Sources index preserves additional discovery links; inclusion there does not mean a source has been reviewed for this assessment. Corrections, completed searches, new direct evidence and changes in requirements should reopen the relevant answer.
High-fructose corn syrup FAQs
What heavy metals are found in high-fructose corn syrup?
The library reports total mercury in high-fructose corn syrup, most often total mercury.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
Which origins or products of high-fructose corn syrup measured lowest?
In one study, total mercury across 9 groups of high-fructose corn syrup ranged from 12 µg/kg (US HFCS manufacturer A, HFCS 42%, sample 3) to 570 µg/kg (US HFCS manufacturer C, HFCS 55%, sample 3); the lowest is the lowest observed in that study, not an established sourcing preference.1Mercury from chlor-alkali plants: measured concentrations in food product sugarEnvironmental Health 2009, 8:2Read source →
References
Works cited on this page, in citation-number order. See Sources for this page’s source inventory. Each title links to a source record with bibliographic details, reported findings, and document provenance.
- Mercury from chlor-alkali plants: measured concentrations in food product sugarPeer-reviewed
- Trace elements concentrations in soil contaminate corn in the vicinity of a cement-manufacturing plant: potential health implicationsPeer-reviewed
- Dilution of rice with other gluten free grains to lower inorganic arsenic in foods for young children in response to European Union regulations provides impetus to setting stricter standardsPeer-reviewed
- Risk assessment of human exposure to lead and cadmium in maize grains cultivated in soils irrigated either with low-quality water or freshwaterPeer-reviewed
- Mercury pollution in vegetables, grains and soils from areas surrounding coal-fired power plantsPeer-reviewed
- GEMS/Food Contaminants database heavy-metal exportsDataset
- Commission Regulation (EU) 2023/915 of 25 April 2023 on maximum levels for certain contaminants in food and repealing Regulation (EC) No 1881/2006Regulation
- Mercury exposure, nutritional deficiencies and metabolic disruptions may affect learning in childrenReview · Correction notice on record
Sources
Browse High-fructose corn syrup Sources for sources cited on this page and additional discovery candidates. The searchable index distinguishes verified citation use from discovery relationships whose relevance has not been established.
Update history
4 November 2026: Added the Dufault 2009 review in Behavioral and Brain Functions. The chlor-alkali pathway and a daily intake estimate for total mercury are now on this page. 22 October 2026: Rebuilt from every high-fructose corn syrup record in the library: 1 occurrence sources, references by form and basis, same-study contrasts and stage-led controls.
